Re: SetDrPt()?

Article View: comp.sys.amiga.tech

Article #9380

Back to comp.sys.amiga.tech Previous Next

#9380

From: Wade Bickel
Date: Tue, 26 Jul 1988 10:56

26 lines
1231 bytes

  Hi,

       In my Benchmark Modula-2 manual the SetDrPt() function is part
     of the Drawing module in the support library, which in this case
     is a just a set of stubs providing redirection to the ROM routines.

       According to the comments included in the module this routine
     corresponds to the following C *MACRO*:
        #define SetDrPt(w,p)
                  {(w)->LinePtrn = p;(w)->Flags |= FRST_DOT;
                   (w)->linepatcnt=15;}


        This is probably a 1.2 function, and thus is not documented in
      many of the common referances.


                                                Good Luck,


                                                                Wade.

UUCP: {cbosgd, hplabs!hp-sdd, sdcsvax, nosc}!crash!pnet01!haitex
ARPA: crash!pnet01!haitex@nosc.mil
INET: haitex@pnet01.CTS.COM

Technical Details

Message-ID: <3244@crash.cts.com>

Path:

arc1-ca.pugleaf.net!utzoo!attcan!uunet!husc6!bloom-beacon!mit-eddie!ll-xn!ames!ucsd!ucsdhub!hp-sdd!ncr-sd!crash!pnet01!haitex

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!husc6!bloom-beacon!mit-eddie!ll-xn!ames!ucsd!ucsdhub!hp-sdd!ncr-sd!crash!pnet01!haitex
From: haitex@pnet01.cts.com (Wade Bickel)
Newsgroups: comp.sys.amiga.tech
Subject: Re: SetDrPt()?
Message-ID: <3244@crash.cts.com>
Date: 26 Jul 88 10:56:47 GMT
Sender: news@crash.cts.com
Organization: People-Net [pnet01], El Cajon CA
Lines: 26