23 pin video port

Article View: comp.sys.amiga.tech

Article #9406

Back to comp.sys.amiga.tech Previous Next

#9406

From: Steve Ludtke
Date: Mon, 01 Aug 1988 17:10

19 lines
1547 bytes

Hi. I've been playing around with the XCLK outputs on the 23 pin
video output, and there are a few things I can't find in the hardware
manual. Supposedly, pin 1 (XCLK) will change state whenever the background
color (color 0) is being displayed. The XCLKEN (pin 2) and GNDRTN (pin 13)
are what I don't understand. XCLKEN is supposed to be an active low pin.
I assumed it was an input, and brought it low. That caused the display
to go blank, and I had to reset to get it back. Now I'm trying to figure
out what exactly this pin is. Is it a sync pulse input for genlocking,
an output indicating whether XCLK is enabled/disabled, or something
else ? (by the way, I get a constant high output from XCLK, ie no 
low pulses for bkgnd color.) Any help would be greatly appreciated.
Thanks.

---------------------------------------------------------------------------
Steve Ludtke
stevel@tybalt.caltech.edu              ..!cit-vax!tybalt.caltech.edu!stevel
stevel@citiago  (Bitnet)               OBS949     (Amer PPl lnk)
72335,1537      (Compuserve)           XJM16487   (Genie)

Technical Details

Message-ID: <7476@cit-vax.Caltech.Edu>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!water!watmath!clyde!att!osu-cis!tut.cis.ohio-state.edu!mailrus!ames!elroy!cit-vax!tybalt.caltech.edu!stevel

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!water!watmath!clyde!att!osu-cis!tut.cis.ohio-state.edu!mailrus!ames!elroy!cit-vax!tybalt.caltech.edu!stevel
From: stevel@tybalt.caltech.edu (Steve Ludtke)
Newsgroups: comp.sys.amiga.tech
Subject: 23 pin video port
Message-ID: <7476@cit-vax.Caltech.Edu>
Date: 1 Aug 88 17:10:05 GMT
Sender: news@cit-vax.Caltech.Edu
Reply-To: stevel@tybalt.caltech.edu (Steve Ludtke)
Organization: California Institute of Technology
Lines: 19