Reading Serial Parity Parameters (Even/Odd/Space/Mark)

Article View: comp.sys.amiga.tech

Article #9485

Back to comp.sys.amiga.tech Previous Next

#9485

From: Rick Flower
Date: Wed, 10 Aug 1988 11:21

14 lines
1090 bytes

I'm trying to read the current settings of the Serial port from within a
program that I'm writing, and seem to be having problems interpreting the
current parity settings.. I'm able to tell whe
when the parity is on or off, but unable to discern the different modes such
as Even/Odd/Space/Mark..  If anyone could help me with this one, I would be
greatful!  Also, when setting the Mark/Space, I'll assume that you would also
need to set the SERF_PARTY_ON bit??  I didn't see this in the Ami manuals
anywhere, but I suppose that it is assumed..

Thanks in advance...


UUCP: {ihnp4!scgvaxd!cadovax, <backbone>}!gryphon!pnet02!rickf
INET: rickf@pnet02.cts.com

Technical Details

Message-ID: <5452@gryphon.CTS.COM>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!attcan!uunet!super!udel!princeton!njin!rutgers!mit-eddie!ll-xn!ames!elroy!gryphon!pnet02!rickf

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!attcan!uunet!super!udel!princeton!njin!rutgers!mit-eddie!ll-xn!ames!elroy!gryphon!pnet02!rickf
From: rickf@pnet02.cts.com (Rick Flower)
Newsgroups: comp.sys.amiga.tech
Subject: Reading Serial Parity Parameters (Even/Odd/Space/Mark)
Message-ID: <5452@gryphon.CTS.COM>
Date: 10 Aug 88 11:21:01 GMT
Sender: root@gryphon.CTS.COM
Organization: People-Net [pnet02], Redondo Beach, CA.
Lines: 14