Article View: comp.sys.amiga.tech
Article #9963Re: Upgrading to 1.3 (was Re: CBM's "blessing")
From: Barry Hales
Date: Wed, 05 Oct 1988 01:09
Date: Wed, 05 Oct 1988 01:09
21 lines
1541 bytes
1541 bytes
In article <12506@oberon.USC.EDU> papa@pollux.usc.edu (Marco Papa) writes: >T make it clear again, to run SetPatch you don't need 1.3 ROMS. To run >FFS you don't need 1.3 ROMs. To use an autoboot device, you NEED 1.3 ROMs. > >-- Marco Papa 'Doc' There is only one point I am confused on. Do you need the 1.3 ROMS to boot a FFS Workbench disk? Or is this considered an autoboot device. I am getting a hard disk, so I will want the ability to boot from it. To do that I understand I need the 1.3 ROMS. But will I need the ROMS to boot a FFS disk in DF0:? Sorry if this is a repeat, but I have never heard this question answered on the net. Many thanks! Barry Hales -- ============================================================================ Barry Hales | Disclaimer: Its my fault, so don't blame bhh@ncsuvx.ncsu.edu | the University..... ============================================================================
Technical Details
Message-ID:
<2218@ncsuvx.ncsu.edu>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!water!watmath!clyde!att!osu-cis!tut.cis.ohio-state.edu!mailrus!ncar!gatech!ncsuvx!bhhReferences:
<7239@gryphon.CTS.COM> <7226@well.UUCP> <2001@aplcomm.jhuapl.edu> <12465@oberon.USC.EDU> <7441@gryphon.CTS.COM> <12506@oberon.USC.EDU>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!water!watmath!clyde!att!osu-cis!tut.cis.ohio-state.edu!mailrus!ncar!gatech!ncsuvx!bhh From: bhh@ncsuvx.ncsu.edu (Barry Hales) Newsgroups: comp.sys.amiga.tech Subject: Re: Upgrading to 1.3 (was Re: CBM's "blessing") Message-ID: <2218@ncsuvx.ncsu.edu> Date: 5 Oct 88 01:09:47 GMT References: <7239@gryphon.CTS.COM> <7226@well.UUCP> <2001@aplcomm.jhuapl.edu> <12465@oberon.USC.EDU> <7441@gryphon.CTS.COM> <12506@oberon.USC.EDU> Reply-To: bhh@ncsuvx.ncsu.ed (Barry Hales) Organization: NCSU Computing Center Lines: 21