1084 De-Interlace (Update)

Thread View: comp.sys.amiga.tech

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Jeffrey C Murphy Wed, 19 Dec 1990 16:42

#7587

Author: Jeffrey C Murphy
Date: Wed, 19 Dec 1990 16:42

23 lines
1874 bytes

 In a previous article I said that my 1084 seems to deinterlace after a
few minutes of operation. Ten minutes (or so) later is flickers between
interlace and non-interlace and then finally syncs back into interlace.
This only happens once when you first turn the computer on.
 I got a reply saying that others have experienced this and said that
he heard "removing a turning from the ferrite beads" (or some such) should
solve it (although he confessed he never tried it and heard it from someone
else). He also said it was a problem with the 2000 itself.
 Recently (while downloading) I had my 2000 running for an extended period
without the monitor turned on. Several hours later I turned on the monitor 
to finish up and noticed that after a few minutes the problem surfaced. Would
this mean it is a problem with the 1084 and not the 2000?


        ---------------------------------------------------------------
      X|     /// If You Didn't Get An Amiga |X| Galactic Overlord Jeff | 
      X| \\\///       Then Be Sure To       |X| V089PFRB@UBVMSD.BITNET |
      X|  \\//          Get A Life!         |X| Galaxy Central, Buf NY |
      XX_______________________________________________________________
       XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

                      Simulated Window FX exclusive to IBM

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads