Thread View: comp.sys.amiga.tech
1 messages
1 total messages
Started by David Le Blanc
Fri, 21 Dec 1990 22:46
A590 woes and blasphemy...
Author: David Le Blanc
Date: Fri, 21 Dec 1990 22:46
Date: Fri, 21 Dec 1990 22:46
57 lines
3150 bytes
3150 bytes
I receive some help for my plea..
----------------------------------------------------------------------------
Subject: Re: Re: a590 bad blocks and corruption woes
>It sounds like you have your drive partitioned incorrectly. If you
>set HiCyl to too high a value, you may be writing to cylinders the
>drive thinks are free for mapping out bad blocks. This is just an
>
Thanks, I retracked the partition two cylinders from the end of the disk,
and the problems *appear* to have vanished.
Why *two* cylinders? Playing around with a disk editor, I found the drive
would not let me directly read the last two cylinders!! (And I wouldnt
have looked if you hadn't suggested it...:)
>educated guess based on what little information you gave.
What more could I have said? Apart from listing the drive geometry and
partition info that is...
>carson@close.cs.columbia.edu (preferred) | Carson Gaspar
>cag4@cunixa.cc.columbia.edu (forwards to above) | BIX: cgaspar
Thanks again.
----------------------------------------------------------------------------
Subject: Re: Re: A590 Woes
>The FFS is on the RDB of the A-590, and you update it from 0 to 1, NOT
>"36"!! You do this in the "Add/Update Filesystems" screen. I don't tknow
>what changing the version number to 36 will do but I'm surprised it let you
>try even.
Why? Who made this rule? Are you serious? Do you really believe it helps?
Why wouldnt the drive let me make it 36? Its just an integer... Geez...:-)E)
I did change it to 1 finally, and big deal, no difference.
>
>Not sure what can happen with this, or if it's causing your problems, but
>just pointing that out. And why not CHECK to see if your location zero is
>zero? Even if you don't know how, simply run a known-buggy program which
>will show up any corruption of location zero.
And blow the machine away? Bugger off. I wrote a fix590 program that
tells me if it *had* to patch location zero. therefore, if it is silent,
then location zero was NULL, (which it never is.)
>|FIDO point address 1:104/421.2, bscott@isis.cs.du.edu, or BBS (303)424-9831|
*** :-)E) A large toothy smile??? Fangs??
----------------------------------------------------------------------------
David Le Blanc UUCP (home) : eyrie!walking!david@labtam@munnari.oz
david@walking ACSNET (work) : david@dogmelb.dog@munnari.oz
CSIRO Division of Geomechanics
"Life? Dont talk to ME about life.. " : Marvin the paranoid android.
----------------------------------------------------------------------------
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads