Thread View: comp.sys.amiga.tech
1 messages
1 total messages
Started by Neale Type
Fri, 11 Jan 1991 09:16
Help on Supraram 8meg board!!
Author: Neale Type
Date: Fri, 11 Jan 1991 09:16
Date: Fri, 11 Jan 1991 09:16
35 lines
1981 bytes
1981 bytes
here is a posting for a friend:-
--------------------------------------------------------------------
TITLE: SupraRAM problem
Hayalp any or all you big noises out there :-)
I have just fitted the Supraram 8up board in my clunky old A2000,
which also has a clunky old 2090 card (see resume). The board has 8mb
of ram, and passes all its test just fine. BUT I can't get my hard
disks to mount without disabling all my fast ram first. Then, when I do get
the winnies up and away, they just write crap instead of files during
operations such as disk copy. (They read ok). All this until I kill
the extra memory... WTF is wrong here... I have tried both the ram
card and the 2090 in different slots, to no avail....
Also, I've found a chip which came with the 2090, along with instrucvtions
which tell me to put the chip into socket U5, sadly socket U5 is a 14 pin
socket and the chip is 24 pin... Anyone else done this mod on a 2090 ?
+-----------------------------------------------------+
<------| Tim Nixon-Smith [ timnix@cix.compulink.co.ukc ] |------>
+-----------------------------------------------------+
---------------------------------------------------------------------
--
------------------------------------------------------------------------------
Neale Type , Computing Service /// | "May the Balrog find you tasty."
University of Sussex, Falmer \\\/// | nealet @ syma.sussex.ac.uk
England. BN1 9QH \X// | ccfe7 @ cluster.sussex.ac.uk
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads