NEC Multisync 4D and Amiga

Thread View: comp.sys.amiga.tech

2 messages

[T] Back to Threads [V] Tree View [G] Group Articles

2 total messages Started by L33QC Mon, 21 Jan 1991 21:51

#8053

Author: L33QC
Date: Mon, 21 Jan 1991 21:51

5 lines
756 bytes

I just bought a NEC Multisync 4D monitor, and it's supposed to have a
resolution of 1024 x 768. However, by adjusting the system-configuration,
the most I have been able to get is about 704 x 474... Does anyone out there
know how I can make the Amiga utilize the full resolution of the monitor?
Any help appreciated... Thanks...

Re: NEC Multisync 4D and Amiga

#8054

Author: logan shaw
Date: Tue, 22 Jan 1991 05:23

19 lines
1453 bytes

In article <91021.165126L33QC@CUNYVM.BITNET> L33QC@CUNYVM.BITNET writes:
>I just bought a NEC Multisync 4D monitor, and it's supposed to have a
>resolution of 1024 x 768. However, by adjusting the system-configuration,
>the most I have been able to get is about 704 x 474... Does anyone out there
>know how I can make the Amiga utilize the full resolution of the monitor?

Buy a ULowell board.  The monitor has a _maximum_ resolution of 1024x768,
but that doesn't mean am stock amiga can generate that.

Alternatively, if you have 2.0, a super Agnus, and a super Denise, you
should be able to get about 1280x600.  (PAL, super-hires overscan).
Of course, that would only be in 4 colors...

>Any help appreciated... Thanks...
-- 
=----------------Logan-Shaw---(lshaw@ccwf.cc.utexas.edu)----------------=
  "Trust in the Lord with all thine heart, and lean not on thine own
   understanding.  In all thy ways acknowledge Him and he shall direct
   thy paths"        - Proverbs 3:5-6

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads