Re: Removable Harddrive help

Thread View: comp.sys.amiga.tech

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Russell McOrmond Tue, 29 Jan 1991 19:36

#8112

Author: Russell McOrmond
Date: Tue, 29 Jan 1991 19:36

25 lines
1645 bytes

In a message posted on 28 Jan 91 23:04:54 GMT,
jesup@cbmvax.commodore.com (Randell Jesup) wrote:
RJ>	Make sure you have reselection turned off when you set up (HDToolBox)
RJ>the disks.  See the articles I've published here before.  When the ROMs
RJ>are available you'll want to upgrade the 2091.

Or the nasty 'Hardware Type Person' way and Switch the SCSI chip with an older
controller (IE: 2090a) that isn't being used at the moment, and keep the new
chip for when the New Roms come out.  (P.S.  Obviously this works : We needed to
do this for a customer that insisted on having the Speed, as well as having a 
RICHO drive and a 40M Quantum - Tested out perfectly with the old chip ..)

 I assume that the 6.1 ROMS aren't the 'updated', then??

RJ>Randell Jesup, Keeper of AmigaDos, Commodore Engineering.
RJ>{uunet|rutgers}!cbmvax!jesup, jesup@cbmvax.commodore.com  BIX: rjesup  
RJ>The compiler runs
RJ>Like a swift-flowing river
RJ>I wait in silence.  (From "The Zen of Programming")  ;-)

---
  Opinions expressed in this message are my Own. I represent nobody else.
  Russell McOrmond   rwm@Atronx.OCUnix.On.Ca   {tigris,alzabo,...}!atronx!rwm 
  FidoNet 1:163/109  Net Support: (613) 230-2282
  Amiga-Fidonet Support  1:1/109       Gateway for .Amiga.OCUnix.On.Ca

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads