Fun with AUX:

Thread View: comp.sys.amiga.tech

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Dennis_Grant%CMR001.bitnet Wed, 30 Jan 1991 21:03

#8115

Author: Dennis_Grant%CMR001.bitnet
Date: Wed, 30 Jan 1991 21:03

27 lines
1599 bytes

     OK, I got the RKMs for X-Mas this year, and one of the wonderful new
discoveries I made was ROM-Wack. Seeing the potential usefulness of it, I
borrowed a Volker-Craig VT3100 from the CS dept, and hooked it up to my
A2000 according to the instructions in the RKM. I then invoked Debug off
the 'bench and got - nothing. I tried various combos of dip switches and
Preferences settings, and nothing ever worked. So I tried a Newcli AUX:,
and I got the "New process" message and the CLI prompt on the monitor.
Aha! However, any command I enter on the remote terminal is ignored.
(The cursor just returns to the start of the line) Even stranger, once
Newcli AUX: is attempted, ROM-Wack works!

So:    1) Why do I have to NewCli AUX: to get ROM-Wack to work?
       2) Why won't the remote CLI process my commands?

I'm using full duplex, 9600 baud, 8 bits, 1 stop, no parity on the
terminal.

Also: If I GURU the machine, how can do I find where the program that
caused it is living?

Thanx in advance,

-------------------------------------------------------------------------------
  Dennis Grant   3rd year CS student at le College Militaire Royal de  St-Jean
  DETUD595@CMR001.BITNET
  How much do I love thee? My accumulator overflows!

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads