🚀 go-pugleaf

mbs@adastra.cvl.va.us (Michael B. Smith) writes:
>>
>> Anyway: the fax is automatically detected and works.	The data caller
>> gets sent a bunch of garble and the logfile says "(date-time) Getty,-,
>> Set Params Error 1 "
>>
Your using Getty to answer and pass control around right?  GPFax doesn't
have its hand on the serial device at this time.

>> The Trinity manual says that the way to get a node to work with UUCP is
>> to run TrinityBBS -sSerial.device -u0 -b<baud rate>. -s = serial device
>> used -u = unit number -b = baud rate.
>>
>> My getty password entry is "guest,*,2,2,(Guest_login),Trinity:,s:bbs_startup
>>

>guest,*,2,2,(Guest_login),Trinity:,*s:bbs_startup
>
>would be my first guess.

My system is DLG, I have:

bbs,,1001,2,(Lunatic Haven),ram:,uucp:etc/bbs

uucp:etc/bbs
============
.key getty,dev,device,unit,unitno,baud,bps,user,usr
.bra {
.ket }
DLG:immed TR3 57600 {bps} -w

-- 
SNAIL:  Lawrence Chen, P.Eng.           VE6LKC/VE6PAQ
        Computer Engineer               Phone: (403)529-2162
        Combustion Dynamics Ltd.        Fax:   (403)529-2516
        #203, 132 4th Avenue S.E.       Email: lawrence@combdyn.com
        Medicine Hat, Alberta  T1A 8B5         dreamer@mlc.awinc.com
CIS:  74200,2431     FIDONET:  1:134/3002      dreamer@lhaven.uumh.ab.ca
DISCLAIMER: All opinions expressed are mine and *NOT* my employers