(no subject)

Thread View: comp.sys.amiga.uucp

5 messages

[T] Back to Threads [V] Tree View [G] Group Articles

5 total messages Started by Chris ODonoghue Fri, 05 Jan 1996 03:19

#163

Author: Chris ODonoghue
Date: Fri, 05 Jan 1996 03:19

29 lines
1592 bytes

Hi
I'm Having a few problems with AmigaUUCP 1.17
I am an ISP and have used AmigaUUCP for about 2 years myself previously
to this work.
I have two other users who use AmigaUUCP 1.17
The problem I have been having is with a A1200/40 with an Elcon 14400 modem
after the handshake the modem just hangs up and uucico returns.
The Log file says it didn't get expected ogin:
Help
I've tried swapping modems and cable but to no avail I suspect their serial
controller but they have had it checked out and the h/w person reckons it's
fine.
But Amiga h/w people are not what they used to be 8-(((
At least in this part of the world.
Is there a way I can get it to use s/w handshaking although I don't think
that's the prob (or at least not entirely) as Term works fine. But then again
ppp1.30 only worked with a software hand shake.

Again I'm baffled.
Help
PLEASE
Chris


-- 
Chris O'Donoghue     |    Coordinator PlaNet (NZ) Nelson 
PO Box 3261          |            
Richmond, 7031       |           Ph  +64-3-5449009
New Zealand          |           Fax +64-3-5449008

Re: (no subject) Sorry

#164

Author: Chris ODonoghue
Date: Fri, 05 Jan 1996 03:21

6 lines
806 bytes

Sorry it's been a LONG day
-- 
Chris O'Donoghue     |    Coordinator PlaNet (NZ) Nelson 
PO Box 3261          |            
Richmond, 7031       |           Ph  +64-3-5449009
New Zealand          |           Fax +64-3-5449008

Re: (no subject) Sorry

#165

Author: Chris O'Donoghue
Date: Fri, 05 Jan 1996 04:28

6 lines
817 bytes

A very long day
-- 
Chris O'Donoghue     |    Coordinator PlaNet (NZ) Nelson 
PO Box 3261          |            
Richmond, 7031       |           Ph  +64-3-5449009
New Zealand          |           Fax +64-3-5449008

Re: (no subject)

#167

Author: Tom Parker
Date: Sat, 06 Jan 1996 21:28

15 lines
876 bytes

Chris O'Donoghue <chris> wrote:

>The problem I have been having is with a A1200/40 with an Elcon 14400 modem
>after the handshake the modem just hangs up and uucico returns.
>The Log file says it didn't get expected ogin:

You could check the timeout field in the uulib:config file and try the -xx
commandline switch on uucico. This will send debug informaion about the login
handshake...

--
Tom Parker - tparker@codeworks.gen.nz
           - 3:772/235.9@Fidonet
           - 41:649/235.9@Amiganet

Re: (no subject)

#168

Author: Chris O'Donoghue
Date: Sun, 07 Jan 1996 22:08

13 lines
1120 bytes

tparker@amiga3k.codeworks.gen.nz (Tom Parker) wrote:
>You could check the timeout field in the uulib:config file and try the -xx
>commandline switch on uucico. This will send debug informaion about the login
>handshake...
I've tried the timeout it makes no difference but will try -xx and see if that
helps.
Ta.
Chris
-- 
Chris O'Donoghue     |    Coordinator PlaNet (NZ) Nelson 
PO Box 3261          |            
Richmond, 7031       |           Ph  +64-3-5449009
New Zealand          |           Fax +64-3-5449008

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads