Re: HP LaserJet

Article View: comp.sys.atari.st

Article #2161

#2161

From: MERTENS
Date: Sat, 01 Jul 1989 13:47

26 lines
1202 bytes


In reply to: (Jon Dunn)

>with all this talk of DeskJets damaging the sound chip on the ST,
>does anyone know if the HP LaserJet Series II printer could
>do any damage?

To find out if your printer will work on the parallel port of your
Atari ST, get yourself a multimeter and survey the pullup resistors
of your printer. These are located between the +5Volts pin and each
of the data pins on the parallel port of your printer (don't forget
to switch off the printer).

If these resistors exceed 3,3Kohms, the printer will work fine. If they
have less, the printer may damage your port.

Hope this was helpfull,


-------

-------------------------------------------------------------
                            |
         Jens, Berlin.      | MERTENS@DB0TUI11
                            | (I never said that)

Technical Details

Message-ID: <349@DB0TUI11.BITNET>

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!mcvax!unido!tub!db0tui11!MERTENS

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!mcvax!unido!tub!db0tui11!MERTENS
From: MERTENS@DB0TUI11.BITNET
Newsgroups: comp.sys.atari.st
Subject: Re: HP LaserJet
Message-ID: <349@DB0TUI11.BITNET>
Date: 1 Jul 89 13:47:43 GMT
Reply-To: MERTENS@DB0TUI11.BITNET ()
Organization: TU Berlin
Lines: 26
Disclaimer: Author bears full responsibility for contents of this article