Re: SupraDrive 60 problem

Article View: comp.sys.atari.st

Article #2209

#2209

From: Dave Ritchie
Date: Sun, 02 Jul 1989 23:52

11 lines
984 bytes


 If this is a Seagate drive mech, there were problems on some of their drives
with stiction (the tendency of two smooth surfaces to stick together), in
combination with a lack of torque in the drive motor. A friend of mine had 
this happen to his drive in a PC. He would get it to start by picking up the
case and spinning it slightly along the axis of the drive motor (which would 
break the stiction bond between the head and the platter). It doesn't take
much of a twist to break the head loose (20-40 degrees). Do you park the 
heads on your drive when you shut it down?
				Dave

Technical Details

Message-ID: <11830043@hpldola.HP.COM>

Path:

arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!rutgers!tut.cis.ohio-state.edu!ucbvax!hplabs!hpfcdc!hpldola!ritchie

References: <3316@cs.dal.ca>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!rutgers!tut.cis.ohio-state.edu!ucbvax!hplabs!hpfcdc!hpldola!ritchie
From: ritchie@hpldola.HP.COM (Dave Ritchie)
Newsgroups: comp.sys.atari.st
Subject: Re: SupraDrive 60 problem
Message-ID: <11830043@hpldola.HP.COM>
Date: 2 Jul 89 23:52:36 GMT
References: <3316@cs.dal.ca>
Organization: HP Elec. Design Div. -ColoSpgs
Lines: 11

Reply to Parent Message