🚀 go-pugleaf

I used Uniterm for years and then moved to STalker when I
switched to a TT with a 19" monitor. As I write, I have
a window open with 55 lines and about 200 columns using
a standard 10 point font (STalker lets you choose fonts).

The only complaints I have heard about STalker is it runs
in a window and on an SM124 at 640x400 one line is lost
for terminal use; with some applications this is critical.

I use it on an SM124 with a Reflex card (1024x496) on an
old MegaST and it works great there too. I highly
recommend it.

As I write, I am on a digital telephone at 19,200 baud
to a VAX system. ZMODEM transfers to-from the VAX are
a charm with ZMODEM when compared with Kermit via
Uniterm.

Hope this helps.