🚀 go-pugleaf

In article <7JAN93.12374686@cc4.crl.aecl.ca>, csullogg@cc4.crl.aecl.ca writes:
> I used Uniterm for years and then moved to STalker when I
> switched to a TT with a 19" monitor. As I write, I have
> a window open with 55 lines and about 200 columns using
> a standard 10 point font (STalker lets you choose fonts).
> 
> The only complaints I have heard about STalker is it runs
> in a window and on an SM124 at 640x400 one line is lost
> for terminal use; with some applications this is critical.
> 
> I use it on an SM124 with a Reflex card (1024x496) on an
> old MegaST and it works great there too. I highly
> recommend it.
> 
> As I write, I am on a digital telephone at 19,200 baud
> to a VAX system. ZMODEM transfers to-from the VAX are
> a charm with ZMODEM when compared with Kermit via
> Uniterm.
> 
> Hope this helps.

  Personally I use BOTH STalker and Uniterm.  I use Uniterm for calling the VAX
Cluster.  I use STalker for everything else.  I think that if STalker had
Kermit support I would use it all the way around!

My $.02



/^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^\
[ Mark Santora                                                       ]
[ DLK0MS9S@umiami.ir.miami.edu                                       ]
[ GEnie : M.SANTORA2                Look with more than your eyes... ]
\____________________________________________________________________/