🚀 go-pugleaf

>    I have an AT compatible with a 720KB 3.5" floppy as drive B and would
>like to format diskettes for use on an Atari 520 ST with a 360KB 3.5" floppy.
>The ST's drive is SS/DD while the AT's drive is DS/DD.  MS-DOS v3.30 does
>not allow me to format a 3.5" disk single-sided.  Is there a PD format
>that would allow me to format a single-sided disk?  If not, can someone
>supply me with the correct parameters for formatting the disk single-sided
>so that I can attempt to modify an 800K format program (800KFMAT) to do the
>trick.
>    Has any ST user accomplished this on any IBM compatible???
>
>Dzung Hoang
>hoang@comus.cs.tulane.edu
>tulane!comus!hoang
>----------

Dzung,
  Look up the DRIVER.SYS in your DOS manual.  This will allow you to create a
Logical drive as a single sided drive.  A format of that logical drive will
create a single sided 360KB 3.5" disc.

Put something like this in your CONFIG.SYS file on your PC.
    DEVICE=DRIVER.SYS /D:1 /H:1
The other parameter defaults should be OK.  The /D: is the drive starting with
0 (1 = 2nd drive {B}).  The /H: is how many heads, thus 1 for 1.  This will
create the next logical drive available on your system.  If you have a hard
disk it will probably be drive D: if not drive C:.

Good Luck,
PjH
patrick@hpmcaa.hp.com