🚀 go-pugleaf

I recently tried to send email to Dave Evans, devans@cix.compulink.com,
but this failed, so I will post it here. Perhaps somebody will forward it...


------------------------------------------------------------
Hi Dave,

how are you?

I tried to install your port of KA9Q here on my STE4, but I was not lucky.
Me and the System manager of the comp center spent some time, we even installed
a spy to watch the serial line.

I use CoNnect (I also tried RUFUS) as terminal program. A Supra V32bis modem is
connected to the modem1 port, and everything works fine: I log in into my host,
start the slip program (it is an SCO server which handles connects to and from
outside university - X.25 and modems) and then start the net.ttp from within
the terminal program.
But: not any sign seems to pass through the AUX: port, the spy does not watch
     anything!

Could you please mail me a config file which works on your site?

I try to install the serial port as follows:
---- /dev/c/net.rc -----------
ip addr [134.96.6.16]
attach asy AUX: 0 slip sl0 1024 512 9600
domain suffix uni-sb.de
domain addserver [134.96.7.7]

I also added /dev/c/domain.txt after inserting my ip address at the end.

What is wrong?

net.ttp does not send signs to AUX: if MiNT is installed or not, it doesn't 
mind at all.


Any good idea???


greetings   Bernhard



--
 *****************************************************************************
 *                      Dipl.Ing. Bernhard Stumpf    |   bestu@rz.uni-sb.de  *
 *     /      ___   /   University of the Saarland   |   rzsbs@rz.uni-sb.de  *
 *    /----. /__. -/-   D-6600 Saarbruecken          |   bestu@h11.saar.de   *
 *   /____/ ___/  /_.   ++49-681-302-4626            |                       *
 *****************************************************************************