HELP!: screen dump question

Article View: comp.sys.atari.st

Article #23967

#23967

From: Craig B. Ziemer
Date: Mon, 12 Jan 1987 14:50

12 lines
1178 bytes

A friend of mine has a Star Micronics 10X graphics printer and a stock 520ST.
He bought the printer mainly for the graphics capability and because the 
dealer told him it was "99% Epson compatable".  Unfortunately, 99% may not
be enough.  The Alt-Help screen dump just produces a lot of garbage on the
paper.  Does anyone know what he could do to correct this?  Is it possible
that the printer is not understanding the control code sent by the ST to
turn on the graphics mode?  Any help or suggestions would be greatly appre-
ciated.  

                                                       Craig Ziemer
                                                       mhuxu!cbz

Technical Details

Message-ID: <6232@mhuxu.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!rutgers!ames!ucbcad!ucbvax!cbatt!ihnp4!mhuxu!cbz

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!rutgers!ames!ucbcad!ucbvax!cbatt!ihnp4!mhuxu!cbz
From: cbz@mhuxu.UUCP (Craig B. Ziemer)
Newsgroups: comp.sys.atari.st,comp.sys.atari.8bit
Subject: HELP!: screen dump question
Message-ID: <6232@mhuxu.UUCP>
Date: Mon, 12-Jan-87 09:50:40 EST
Article-I.D.: mhuxu.6232
Posted: Mon Jan 12 09:50:40 1987
Date-Received: Wed, 14-Jan-87 00:52:30 EST
Organization: AT&T Bell Laboratories, Reading, PA.
Lines: 12