avatex modem woes

Article View: comp.sys.atari.st

Article #24202

#24202

From: 20370843
Date: Mon, 29 Dec 1986 06:46

20 lines
1435 bytes

Received: by WSUVM1 (Mailer X1.23) id 2296; Sun, 28 Dec 86 22:41:35 PLT
Resent-Date:  Sun, 28 Dec 86 22:40:27 PLT
Resent-From:  "Brian L. Henry" <20370843@WSUVM1>
Resent-To:    Atari Mailing List <info-atari16@score.stanford.edu>
Date:         Sun, 28 Dec 86 14:36:16 PLT
From:         "Brian L. Henry" <20370843@WSUVM1>
Subject:      avatex modem woes
To:           Atari Mailing List <info-ata@score.stanford.edu>

My avatex 1200 modem has worked fine so far for kermit and xmodem uploads
and downloads (probably over 200K of each).  I had to change a
DIP switch in the back though:   sw 6 is down (DTR forced active).  All
others are in the default or up position.  I haven't changed any of the
flow-control parameters through the control panel.

My RS-232 cable only has the following lines connected: Ground, RD, TD.

Hope this helps.

---BLH

Technical Details

Message-ID: <8612310159.AA03303@ucbvax.Berkeley.EDU>

Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!lll-lcc!ames!ucbcad!ucbvax!wsuvm1.BITNET!20370843

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!lll-lcc!ames!ucbcad!ucbvax!wsuvm1.BITNET!20370843
From: 20370843@wsuvm1.BITNET
Newsgroups: comp.sys.atari.st
Subject: avatex modem woes
Message-ID: <8612310159.AA03303@ucbvax.Berkeley.EDU>
Date: Mon, 29-Dec-86 01:46:22 EST
Article-I.D.: ucbvax.8612310159.AA03303
Posted: Mon Dec 29 01:46:22 1986
Date-Received: Wed, 31-Dec-86 03:44:26 EST
Sender: daemon@ucbvax.BERKELEY.EDU
Reply-To: 20370843%WSUVM1.BITNET@forsythe.stanford.edu
Organization: The ARPA Internet
Lines: 20