Article View: comp.sys.atari.st
Article #24585Re: HELP -- Handshaking on 520ST serial ports
From: jdn
Date: Tue, 27 Jan 1987 15:50
Date: Tue, 27 Jan 1987 15:50
16 lines
1115 bytes
1115 bytes
In article <2453@well.UUCP>, espen@well.UUCP (Peter Espen) writes:
>
> I am trying to set up communications between a stand alone
> 68000 contlled board with standard RS232 serial ports and my 520ST.
> I have everything setup and communicating, however I need to be able to
> hold off the stand-alone board via hardware/DTR hardware handshaking andf
> apparently the atari 520ST only supports XON/XOFF software handshaking
> on the serial ports.
I think you should have no trouble supporting hardware handshaking.
Take a look at the Rsconf() call.
Jonathan Nagy
{ihnp4|harvard|allegra|seismo}!homxc!jdn
Technical Details
Message-ID:
<1885@homxc.UUCP>Path:
arc1-ca.pugleaf.net!utzoo!watmath!clyde!cbatt!ihnp4!houxm!homxc!jdnReferences:
<2453@well.UUCP>Show Full Headers
Complete Article Headers
Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: arc1-ca.pugleaf.net!utzoo!watmath!clyde!cbatt!ihnp4!houxm!homxc!jdn From: jdn@homxc.UUCP Newsgroups: comp.sys.atari.st Subject: Re: HELP -- Handshaking on 520ST serial ports Message-ID: <1885@homxc.UUCP> Date: Tue, 27-Jan-87 10:50:31 EST Article-I.D.: homxc.1885 Posted: Tue Jan 27 10:50:31 1987 Date-Received: Wed, 28-Jan-87 22:57:31 EST References: <2453@well.UUCP> Organization: AT&T Bell Laboratories, Holmdel Lines: 16