Re: Upgrading a 1040 to 4 Megs

Article View: comp.sys.atari.st

Article #24792

#24792

From: atwell
Date: Fri, 06 Feb 1987 05:47

19 lines
1304 bytes

Yes, the 520/1040 upgrade to 4 meg is available today if you want to
spend the money.  Tech-specialities offers a 1 meg upgrade board (solderless)
that can be upgraded to 2.5 meg or 4 meg by replacing the 256K chips on it
in the 1 meg configuration.  Or you can get a 4 meg board now but 1 Mbit
chips are quite expensive at the present.

	tech specialities
	PO Box 73122
	Houston, Texas 77273 (USA)

(I have no connection to tech specialities)

What about upgrading the current ST's to accept the expansion peripherals
that will be available on the Mega's.  It seems like there may be a lot 
of yet to be developed peripherals that we will miss out on unless something
is done. (like the Atari Laserprinter, for example)

Bart

Technical Details

Message-ID: <4271@utah-cs.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!watmath!clyde!rutgers!mit-eddie!bacchus!husc6!ut-sally!utah-cs!atwell

References: <8702051433.AA26615@inria.UUCP>

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!watmath!clyde!rutgers!mit-eddie!bacchus!husc6!ut-sally!utah-cs!atwell
From: atwell@utah-cs.UUCP
Newsgroups: comp.sys.atari.st
Subject: Re: Upgrading a 1040 to 4 Megs
Message-ID: <4271@utah-cs.UUCP>
Date: Fri, 6-Feb-87 00:47:33 EST
Article-I.D.: utah-cs.4271
Posted: Fri Feb  6 00:47:33 1987
Date-Received: Sat, 7-Feb-87 16:36:13 EST
References: <8702051433.AA26615@inria.UUCP>
Reply-To: atwell@utah-cs.UUCP (Bart L. Atwell)
Organization: University of Utah CS Dept
Lines: 19

Reply to Parent Message