Article View: comp.sys.atari.st
Article #2520Re: adding memory to 1040ST
From: ENRIQUEZ
Date: Fri, 21 Jul 1989 19:18
Date: Fri, 21 Jul 1989 19:18
21 lines
1402 bytes
1402 bytes
>From Xerox.COM!"Paul_Millard.WGCERX" Paul writes:
>
>**************************************************************
>2. my second atari is a 520ST with a 1 meg upgrade. each chip has
>piggybacked on it a second 25k dram. All pins are soldered except for the
>chip select. It works, and there are no connectors to work loose like my
>ezram.
>**************************************************************
Having (finally) decided to upgrade to 1M, all that remains for me
to do is pick the method in which to do this. The above mentioned
solution seems promising (i.e. inexpensive) and I would like, if possible,
a more detailed description of the process of piggybacking(?) the
drams.
Since I am no expert (but learning :-) on this sort of thing, perhaps
one kind soul could mail me either a reference or "walk-through" instructions
on the installation of the drams.
thanks mark enriquez
acs60222@zach.UUCP
Technical Details
Message-ID:
<541@winnie.fit.edu>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!uflorida!winnie!zach!acs60222References:
<698@lzaz.ATT.COM>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!uflorida!winnie!zach!acs60222 From: acs60222@zach.fit.edu ( ENRIQUEZ) Newsgroups: comp.sys.atari.st Subject: Re: adding memory to 1040ST Message-ID: <541@winnie.fit.edu> Date: 21 Jul 89 19:18:06 GMT References: <698@lzaz.ATT.COM> Sender: usenet@winnie.fit.edu Reply-To: acs60222@zach.UUCP ( ENRIQUEZ) Organization: Florida Institute of Technology, ACS, Melbourne, FL Lines: 21