plugboards for the cartridge port

Article View: comp.sys.atari.st

Article #25390

#25390

From: st69
Date: Wed, 04 Mar 1987 17:27

8 lines
830 bytes

Does anyone know of any prototyping boards that will plug into the
catridge slot of the ST?  It seems to need a 40-pin card edge with a
center spacing of ~0.08 inches, something which neither Augat or
Vector make.

thanks in advance,

Tom Erbe (uucp: sun!sdcarl!tre, genie: T.ERBE)

Technical Details

Message-ID: <788@sdcc12.ucsd.EDU>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!water!watnot!watmath!clyde!bellcore!faline!ulysses!gatech!mcnc!ece-csc!ncrcae!ncr-sd!sdcsvax!sdcc6!sdcc12!st69

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!utgpu!water!watnot!watmath!clyde!bellcore!faline!ulysses!gatech!mcnc!ece-csc!ncrcae!ncr-sd!sdcsvax!sdcc6!sdcc12!st69
From: st69@sdcc12.UUCP
Newsgroups: comp.sys.atari.st
Subject: plugboards for the cartridge port
Message-ID: <788@sdcc12.ucsd.EDU>
Date: Wed, 4-Mar-87 12:27:22 EST
Article-I.D.: sdcc12.788
Posted: Wed Mar  4 12:27:22 1987
Date-Received: Fri, 6-Mar-87 22:42:52 EST
Organization: University of California, San Diego
Lines: 8
Keywords: prototype