Re: Where to get 1040ST Video connector.

Article View: comp.sys.atari.st

Article #2553

#2553

From: Michael Albo
Date: Sun, 23 Jul 1989 16:19

19 lines
1449 bytes

In article <2265@husc6.harvard.edu> clark@nous.UUCP (James J. Clark) writes:
>I know this has been covered in this news group
>before, but be patient with me as didn't think
>to save any of the responses....
>
>I am looking for sources for the 13 pin (male)
>plug which connects to the 1040ST video output
>connector. I am trying to connect a Samsung
>multisync monitor to the ST in place of the
>Atari color monitor.
>
A friend of mine and myself are doing exactly the same
thing. The source you are looking for is Best Electronics
in Calif. At the momemt I don't have their address but I
will post it separately. Best carries most Atari components.
We found that the best answer is to order a 13 pin male to
13 pin male 6 foot video cable for $20 and cut it in two so
that we both had a pinned video cable. You can by a raw connector
also, but the pins are no fun to solder to.

Technical Details

Message-ID: <2578@iscuva.ISCS.COM>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!apple!usc!cs.utexas.edu!uunet!iscuva!iscuve.iscs.com!michaela

References: <2265@husc6.harvard.edu>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!apple!usc!cs.utexas.edu!uunet!iscuva!iscuve.iscs.com!michaela
From: michaela@iscuve.iscs.com (Michael Albo)
Newsgroups: comp.sys.atari.st
Subject: Re: Where to get 1040ST Video connector.
Keywords: 1040ST, Video connector, Multisync monitor
Message-ID: <2578@iscuva.ISCS.COM>
Date: 23 Jul 89 16:19:45 GMT
References: <2265@husc6.harvard.edu>
Sender: news@iscuva.ISCS.COM
Reply-To: michaela@iscuve.iscs.com.UUCP (Michael Albo)
Organization: ISC Systems Corporation, Spokane WA
Lines: 19

Reply to Parent Message