Spectre/Printer Combo

Article View: comp.sys.atari.st

Article #2581

#2581

From: David Beckemeyer
Date: Mon, 24 Jul 1989 17:03

26 lines
1295 bytes

Which printer setup works best with Spectre GCR?   I have a Mac
Imagewriter II (Serial) and several normal Epson-type (parallel)
printers.  If I use the Imagewriter, I have to use the serial port
on the "Mac" and therefore I can't use a modem without disconnecting
the printer.   If I use the Epson printer, which drivers work the
best?   Do they work well with the following programs?

	1) Microsoft Word (3.01 and 4.x).

	2) Mac Draw

	3) Mac Project

	4) Page Maker

I've had difficulty using the Imagewriter II with Magic Sac (buffer
overflows, lost chars, etc.).  Will these problems go away with Spectre
GCR?

Reply by e-mail and I'll summarize.  Thanks.
-- 
David Beckemeyer (david@bdt.UUCP)	| "I'll forgive you Dad...  If you take
Beckemeyer Development Tools		| a breath mint."
478 Santa Clara Ave. Oakland, CA 94610	|    Bart - "The Simpsons"
UUCP: {uunet,ucbvax}!unisoft!bdt!david	|

Technical Details

Message-ID: <616@bdt.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!unisoft!bdt!david

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!unisoft!bdt!david
From: david@bdt.UUCP (David Beckemeyer)
Newsgroups: comp.sys.atari.st
Subject: Spectre/Printer Combo
Keywords: Spectre Mac ST
Message-ID: <616@bdt.UUCP>
Date: 24 Jul 89 17:03:38 GMT
Distribution: na
Organization: Beckemeyer Development Tools, Oakland CA
Lines: 26