🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: comp.sys.atari.st
Article #26476

Re: HDBOOT

#26476
From: XBR4D76H
Date: Fri, 24 Apr 1987 01:21
30 lines
1632 bytes
Received: from BR4.THD.DA.D.EUROPE by DDATHD21.BITNET
          via GNET with RJE ; 24 Apr 87 02:07:43
Date:     Fri, 24 Apr 87 02:06:48 +0200 (Central European Sommer Time)
From:     XBR4D76H@DDATHD21.BITNET
Subject:  Re: HDBOOT
To:       info-atari16@score.stanford.edu
X-VMS-To: X%"info-atari16@score.stanford.edu"

In Digest #176  Karl Rowley <rowley@orville.arpa> writes:

> I tried out HDBOOT using the following procedure:
>
> (1) I created a \AUTO folder on drive C of my hard disk.
> (2) I copied AHDI.PRG into this folder.
> (3) I ran HDB and "installed" the boot sector on drive C.

AHDI.PRG must **not** be in the \AUTO folder. It has to be in the root
directory (\) of drive C:.

> Is there a difference between GEMBOOT and the HDBOOT that was sent out
> recently?

Yes.
HDB in archive HDBOOT is a hard disk boot installer. The boot sector written
by HDB enables the ST to boot without floppy.
GEMBOOT in archive GEMSOFT is a GEMDOS fix for the 40 folder bug. GEMBOOT has
to be put into the \AUTO folder.

  Konrad A. Hahn
  BITNET: XBR4D76H@DDATHD21
Technical Details
Message-ID: <8704240022.AA27228@ucbvax.Berkeley.EDU>
Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!columbia!rutgers!ames!ucbcad!ucbvax!DDATHD21.BITNET!XBR4D76H

Show Full Headers
Complete Article Headers
Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!columbia!rutgers!ames!ucbcad!ucbvax!DDATHD21.BITNET!XBR4D76H
From: XBR4D76H@DDATHD21.BITNET
Newsgroups: comp.sys.atari.st
Subject: Re: HDBOOT
Message-ID: <8704240022.AA27228@ucbvax.Berkeley.EDU>
Date: Thu, 23-Apr-87 20:21:45 EST
Article-I.D.: ucbvax.8704240022.AA27228
Posted: Thu Apr 23 20:21:45 1987
Date-Received: Sat, 25-Apr-87 12:43:23 EST
Sender: daemon@ucbvax.BERKELEY.EDU
Distribution: world
Organization: The ARPA Internet
Lines: 30