Article View: comp.sys.atari.st
Article #26963GULAM: rx and sx - and help with GULAM & MWC 2.0
From: Richard Sansom
Date: Thu, 21 May 1987 15:14
Date: Thu, 21 May 1987 15:14
23 lines
1696 bytes
1696 bytes
In article <436@sbcs.UUCP> pmt@sbcs.UUCP (Phil Tromovitch) writes:
> Did anyone manage to get the commands rx and sx to work? In the manual,
>under 'sx', it says look at 'rx'. But there's no entry for 'rx' !!
You can rx a file by UNDOing te (after having started up the xmodem file
transfer on the other side) and typing: "rx file". I haven't tried to sx a
file yet (sounds like fun ;-). Once the transfer is complete, you may
resume your session by hitting the keypad "0".
Now, for my troubles: I can't get the MWC 2.0 compiler to work correctly
with gulam. I get errors about missing "}" characters in the pre-processor,
and all kinds of other strange stuff.
I _did_ set the env_type to mw, and that didn't seem to help too much (any).
Does anyone out there have any ideas? Thanks.
-Rich
--
/////////////////////////////////////\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
/// Richard E. Sansom TRW Electronics & Defense Sector \\\
\\\ {decvax,ucbvax,ihnp4}!trwrb!sansom Redondo Beach, CA ///
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\/////////////////////////////////////
Technical Details
Message-ID:
<1912@trwrb.UUCP>Path:
arc1-ca.pugleaf.net!utzoo!mnetor!seismo!rutgers!ucla-cs!sdcrdcf!trwrb!sansomReferences:
<436@sbcs.UUCP>Show Full Headers
Complete Article Headers
Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!rutgers!ucla-cs!sdcrdcf!trwrb!sansom From: sansom@trwrb.UUCP (Richard Sansom) Newsgroups: comp.sys.atari.st Subject: GULAM: rx and sx - and help with GULAM & MWC 2.0 Message-ID: <1912@trwrb.UUCP> Date: Thu, 21-May-87 11:14:40 EDT Article-I.D.: trwrb.1912 Posted: Thu May 21 11:14:40 1987 Date-Received: Sat, 23-May-87 13:48:29 EDT References: <436@sbcs.UUCP> Reply-To: sansom@trwrb.UUCP (Richard Sansom) Organization: TRW EDS, Redondo Beach, CA Lines: 23