Re: Aerco RAM board experience and questions - an update! - Article 27320 - go-pugleaf

Article View: comp.sys.atari.st

Article #27320

Re: Aerco RAM board experience and questions - an update!

#27320

From: Dave Clemans
Date: Mon, 22 Jun 1987 16:16

8 lines
935 bytes

I have a system with an Aerco board configured with 4 megabytes; the system
has been extremely solid (though note that it's run off a XT clone power supply,
and not off the Atari brick).

This is a ST that dates from the initial introduction in the US (July 85).

dgc

Technical Details

Message-ID: <753@dclemans.mntgfx.MENTOR.COM>

Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!rochester!cornell!uw-beaver!tektronix!sequent!mntgfx!dclemans

References: <838@van-bc.UUCP> <4249@drutx.ATT.COM> <251@jplpro.JPL.NASA.GOV> <858@van-bc.UUCP>

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!rochester!cornell!uw-beaver!tektronix!sequent!mntgfx!dclemans
From: dclemans@mntgfx.MENTOR.COM (Dave Clemans)
Newsgroups: comp.sys.atari.st
Subject: Re: Aerco RAM board experience and questions - an update!
Message-ID: <753@dclemans.mntgfx.MENTOR.COM>
Date: Mon, 22-Jun-87 12:16:24 EDT
Article-I.D.: dclemans.753
Posted: Mon Jun 22 12:16:24 1987
Date-Received: Wed, 24-Jun-87 05:53:12 EDT
References: <838@van-bc.UUCP> <4249@drutx.ATT.COM> <251@jplpro.JPL.NASA.GOV> <858@van-bc.UUCP>
Organization: Mentor Graphics, Beaverton OR
Lines: 8
Summary: more experience

Reply to Parent Message