🚀 go-pugleaf

in article <12901@topaz.rutgers.edu>, lachac@topaz.rutgers.edu (Gerard Lachac) says:
> Posted: Wed Jun 24 14:54:13 1987
> 
> In article <1502@batcomputer.tn.cornell.edu> braner@tcgould.tn.cornell.edu (braner) writes:
>>Question: will Atari convert the STs to a 1.4-Megabyte disk format compatible
>>with the new IBM PS/2 machines?
>>
>>- Moshe Braner
> 
> If I'm not mistaken, aren't the drives on the PS/2 series using some kind of
> propriatory drive/controller combo that makes them ultra expensive?? (and also
> not compatible with the drives in the current ST's)
> 
> -- 
> lachac@topaz.rutgers.edu <-----OR-----> {seismo|ames}!rutgers!topaz!lachac

NO.  The drives are pretty much off-the-shelf units of 1.44 mb 3.5".  The
controller is a standard high-density controller (like those used in ATs)
that support higher bit rates on drives that handle it (1.2 mb 5.25" drives
are of this type).
 
If a high density controller were built into the ST, then we could take
advantage of these drives (including 8", too!  WOW!).

Then, (for an MS-DOS machine) the disk format must either be supported in
the ROM or a handler must be installed.  I imagine it would be supported in
the ROM if an ST ever came with this built in.

But is it so important?  The going price for 2 mb 3.5" floppies is about $6
a piece.  I prefer taking more room with the smaller disks :-)


-- 
MANNERS:  Just say no _t_h_a_n_k _y_o_u!

Dragon Technology!!       {hplabs,ames,sun,etc.}!oliveb!olivej!dragon