🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: comp.sys.atari.st
Article #27395

Drive alignment problems?

#27395
From: lansd
Date: Mon, 29 Jun 1987 00:24
11 lines
1164 bytes
  Has anyway had problems with their drives after opening a window
without a disk in the drive? I have done the following several times
(by accident) and have had to have the drive replaced 3 times: I
removed the disk and had the ST do a seek, but instead it made the
usual sound that it would make if no disk were in the drive. After
using the drive for a few hours the old 'READ ERROR' box would start
popping up on usually working diskettes.
   I would normally have to close the window, and re-open it to have
it read the diskette properly (re-home/re-align the head).
   I am fed up with this occuring, is there an easy fix to my drive's
problem, or must it be replaced AGAIN!
Technical Details
Message-ID: <1987Jun28.202416.29698@gpu.utcs.toronto.edu>
Path: arc1-ca.pugleaf.net!utzoo!utgpu!lansd

Show Full Headers
Complete Article Headers
Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!utgpu!lansd
From: lansd@utgpu.UUCP
Newsgroups: comp.sys.atari.st
Subject: Drive alignment problems?
Message-ID: <1987Jun28.202416.29698@gpu.utcs.toronto.edu>
Date: Sun, 28-Jun-87 20:24:16 EDT
Article-I.D.: gpu.1987Jun28.202416.29698
Posted: Sun Jun 28 20:24:16 1987
Date-Received: Mon, 29-Jun-87 04:43:30 EDT
Organization: University of Toronto Computing Services
Lines: 11
Checksum: 64065