HPIB interface

Article View: comp.sys.atari.st

Article #28159

#28159

From: SCTEXT
Date: Tue, 08 Sep 1987 08:04

19 lines
1333 bytes

I like to interface the 1040ST to some devices with a HPIB (or
GPIB or IEC or IEEE-488) interface.
One way to do it is to buy a standard RS232 to HPIB converter,
but this costs as much as the ATARI itself !!! And maybe it is
slow, because of the serial interface. But the reason I don't
like it, is that I want to use the RS232 port for connecting the
ATARI to a host computer.
What I like to know is if there is a way to connect a HPIB
interface to the cartridge port. Can I buy such an interface or
was there an article in some magazine about it?
I don't want to do really fancy I/O: no need for serving
interrupts. I just want to use some existing plotters and
printers. Thanks for any help.


Ron van Ewijk
Technical University Delft
The Netherlands
Netaddress on EARN (bitnet): sctext@hdetud5

Technical Details

Message-ID: <8709081115.AA10836@ucbvax.Berkeley.EDU>

Path: arc1-ca.pugleaf.net!utzoo!mnetor!uunet!husc6!cmcl2!rutgers!ames!sdcsvax!ucbvax!HDETUD5.BITNET!SCTEXT

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!mnetor!uunet!husc6!cmcl2!rutgers!ames!sdcsvax!ucbvax!HDETUD5.BITNET!SCTEXT
From: SCTEXT@HDETUD5.BITNET
Newsgroups: comp.sys.atari.st
Subject: HPIB interface
Message-ID: <8709081115.AA10836@ucbvax.Berkeley.EDU>
Date: Tue, 8-Sep-87 04:04:00 EDT
Article-I.D.: ucbvax.8709081115.AA10836
Posted: Tue Sep  8 04:04:00 1987
Date-Received: Wed, 9-Sep-87 02:45:38 EDT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The ARPA Internet
Lines: 19