Re: PC-Ditto and IBM Boot disks

Article View: comp.sys.atari.st

Article #28197

#28197

From: Michael Schuster
Date: Thu, 10 Sep 1987 21:26

17 lines
1379 bytes

In article <510@daisy.UUCP> turner@daisy.UUCP (D'arc Angel) writes:
>Well you can attach a 5 1/4" disk to your atari (it takes 1 buffer chip 
>and some cable)

I'd appreciate, if you could manage it, a part number for that buffer chip
and instructions as to where to install it. I've been trying to get a
Tandon TM-100 to work with an IB Drive cable for quite some time. Even
with proper step rate, termination pack removed, etc .. the drive just
goes crazy. Explicit instructions (pin # to pin #) would help A LOT.
Thanks!

------------------
-- 
l\  /l'   _  Mike Schuster          {sun!hoptoad,cmcl2!phri}!dasys1!schuster
l \/ lll/(_  Big Electric Cat       schuster@dasys1.UUCP
l    lll\(_  New York, NY USA

Technical Details

Message-ID: <1250@dasys1.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!mnetor!uunet!husc6!mit-eddie!ll-xn!ames!ptsfa!hoptoad!dasys1!schuster

References: <[E.ISI.EDU].7-Sep-87.13:58:44.TAC.354TFW-SIX> <510@daisy.UUCP>

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!mnetor!uunet!husc6!mit-eddie!ll-xn!ames!ptsfa!hoptoad!dasys1!schuster
From: schuster@dasys1.UUCP (Michael Schuster)
Newsgroups: comp.sys.atari.st
Subject: Re: PC-Ditto and IBM Boot disks
Message-ID: <1250@dasys1.UUCP>
Date: Thu, 10-Sep-87 17:26:01 EDT
Article-I.D.: dasys1.1250
Posted: Thu Sep 10 17:26:01 1987
Date-Received: Sat, 12-Sep-87 16:21:23 EDT
References: <[E.ISI.EDU].7-Sep-87.13:58:44.TAC.354TFW-SIX> <510@daisy.UUCP>
Reply-To: schuster@dasys1.UUCP (Michael Schuster)
Organization: The Big Electric Cat, NYC
Lines: 17
Summary: Hooking up a 5.25" Floppy

Reply to Parent Message