Re: cursor question

Article View: comp.sys.atari.st

Article #28279

#28279

From: Dave Allum
Date: Wed, 16 Sep 1987 08:57

17 lines
1074 bytes

The cursor may be changed by calling the xbios routine Cursconf,

   int Cursconf(function, rate) int function, rate ;

Values for function are,

   0  disable cursor
   1  enable cursor
   2  flash cursor
   3  steady cursor
   4  set flash rate
   5  get flash rate

The rate parameter is only used for function 4 and is the flash frequency
required.  Cursconf returns the current flash rate if function is set to 5.

For assembler programmers Cursconf is xbios (trap 14) function 21.

Technical Details

Message-ID: <1675@bath63.ux63.bath.ac.uk>

Path: arc1-ca.pugleaf.net!utzoo!mnetor!uunet!seismo!mcvax!ukc!dcl-cs!bath63!sc_dra

References: <20109IGW@PSUVMB>

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!mnetor!uunet!seismo!mcvax!ukc!dcl-cs!bath63!sc_dra
From: sc_dra@ux63.bath.ac.uk (Dave Allum)
Newsgroups: comp.sys.atari.st
Subject: Re: cursor question
Message-ID: <1675@bath63.ux63.bath.ac.uk>
Date: Wed, 16-Sep-87 04:57:07 EDT
Article-I.D.: bath63.1675
Posted: Wed Sep 16 04:57:07 1987
Date-Received: Sat, 19-Sep-87 18:49:46 EDT
References: <20109IGW@PSUVMB>
Reply-To: sc_dra@ux63.bath.ac.uk (Dave Allum)
Organization: SWURCC, University of Bath, U.K.
Lines: 17
Summary: XBIOS Cursconf

Reply to Parent Message