🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: comp.sys.atari.st
Article #28516

Re: Atari Hard Drives

#28516
From: Freddy Kreuger
Date: Sat, 03 Oct 1987 21:19
14 lines
1232 bytes
I have not had any problems at all with my SH204.  Do you always wait
until the seek-alignment is finished before turning your computer on?
My drive has performed flawlessly but I needed a little more storage
so I disconnected the internal hard drive and connected a Micropolis
50 Meg drive to the controller.  THis works too but a few applications
have problems (Final Word can read the swap file but cannot work with it,
etc.)  I think these problems are because of the extended partitioning
I have done with the Supra Formatter (4 Meg, 4.5 Meg, 7 Meg, 4.9 Meg, 
10.3 Meg, 10.3 Meg).

Demand a replacement if possible...you must have a defective board--
the controller??

G. Onufer
Technical Details
Message-ID: <563@uop.UUCP>
Path: arc1-ca.pugleaf.net!utzoo!mnetor!uunet!husc6!mit-eddie!ll-xn!ames!ucbcad!ucbvax!ucdavis!uop!exodus
References: <698@tellab5.UUCP>

Show Full Headers
Complete Article Headers
Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!mnetor!uunet!husc6!mit-eddie!ll-xn!ames!ucbcad!ucbvax!ucdavis!uop!exodus
From: exodus@uop.UUCP (Freddy Kreuger)
Newsgroups: comp.sys.atari.st
Subject: Re: Atari Hard Drives
Message-ID: <563@uop.UUCP>
Date: Sat, 3-Oct-87 17:19:34 EDT
Article-I.D.: uop.563
Posted: Sat Oct  3 17:19:34 1987
Date-Received: Wed, 7-Oct-87 05:03:10 EDT
References: <698@tellab5.UUCP>
Organization: Somewhere perpendicular to reality...
Lines: 14
Summary: No problems here...