NEEDED 5.25 inch drive info

Article View: comp.sys.atari.st

Article #28976

#28976

From: pete
Date: Sat, 31 Oct 1987 16:16

19 lines
1341 bytes

	hi Everybody
  I have been trying for a while to get this information, I guess I'll
have to try again...
  Does anybody out there in NetLand know the Pinout designations for a
Tandon TM-100-2A Floppy disk drive? (I am talking here about the edge
connector on the back of the drive. I would image that just about any
Tandon 5.25 inch floppy drive would have the same pinout, so info on
any model would be greatly appreciated.

	Thanks in Advance,
	Pete Santangeli

-------------------------------------------------------------------------------
pete@utgpu (pete@utgpu@utai)	(USENET)
psantangeli 		(BIX)
pete@UTORONTO		(BITNET)
"Argue for your limitations,
	And sure enough they are yours." -Richard Bach, Illusions.

Technical Details

Message-ID: <1987Oct31.111639.19546@gpu.utcs.toronto.edu>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!pete

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!utgpu!pete
From: pete@utgpu.UUCP
Newsgroups: comp.sys.atari.st,comp.sys.ibm.pc
Subject: NEEDED 5.25 inch drive info
Message-ID: <1987Oct31.111639.19546@gpu.utcs.toronto.edu>
Date: Sat, 31-Oct-87 11:16:39 EST
Article-I.D.: gpu.1987Oct31.111639.19546
Posted: Sat Oct 31 11:16:39 1987
Date-Received: Sun, 1-Nov-87 06:24:00 EST
Reply-To: pete@utgpu,pete@utgpu@utai
Followup-To: pete@utgpu,pete@utgpu@utai
Distribution: na
Organization: University of Toronto Computing Services
Lines: 19
Keywords: 5 1/4 5.25
Checksum: 47277