🚀 go-pugleaf

Received: by MARIST (Mailer X1.25) id 2559; Wed, 25 Nov 87 08:16:43 EST
Resent-Date:  Wed, 25 Nov 87 08:16:29 EST
Resent-From:  "A. Harry Williams" <HARRY@MARIST>
Resent-To:    INFO-ATARI16@SCORE.STANFORD.EDU
Date: 25 November 1987, 10:14:50 MEZ
From: S. Kaufmann               +49 228 737773       UNM407   at DBNRHRZ1
TO:   INFO-A16 AT MARIST



----------------------------Original message----------------------------
Re: Filetransfer between AT-Clone and Atari St

I have an Atari 520 ST+ and an AT-Clone. Now I want to download some Files
from the AT to the Atari. I tried it and Terminal mode works well, but
Filetransfer with Kermit does not!! I put the AT in Server mode and started
a GET (from Server) Command on the Atari. The AT went into Send File mode but
got no acknoledge from the Atari.
What pins must I connect between the computers, what communication parameters
must I choose?
I used UNITERM 1.7a and MS-Kermit 2.29c. Following Pins were connected:
AT                 ATARI
 1  ---------------  1          THE PIN FUNCTION IS THE SAME ON ATARI AND AT!
 2  ---------------  3          2 = TX
 3  ---------------  2          3 = RX
 4  ---------------  5          4 = CTS
 5  ---------------  4          5 = RTS
 6  ---------------  20         6 = DTR ?
 7  ---------------  7          7 = GND
 8  ---------------  20         8 = DSR ?
 20 ---------------  6         20 = DCD ?
 20 ---------------  8

Please, can someone out in the net give me some help?!
E-Mail direct to UNM407 at DBNRHRZ1.BITNET or to the digest.
Thanks in advance
Stefan Kaufmann ( UNM407%DBNRHRZ1.BITNET)