Article View: comp.sys.atari.st
Article #32553RGB to composite video
From: Kevin VandeWettering
Date: Sun, 15 May 1988 03:26
Date: Sun, 15 May 1988 03:26
13 lines
773 bytes
773 bytes
I have an Atari ST, which due to brain-damage, has only RGB monitor outputs. I would like to be able to record animations generated with CAD3d, Aegis Animator etc. for use with my VCR. Does anyone have any ideas for building (or know where I can get) a board which will convert RGB video to composite?. Because of my "stone knives and bear skins" tool box, I am looking for a minimum chip count, simplicity is secondary to expense. Thanks kevin@kjvw
Technical Details
Message-ID:
<238@kjvw.UUCP>Path:
arc1-ca.pugleaf.net!utzoo!attcan!uunet!tektronix!reed!percival!bucket!kjvw!kevinShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!tektronix!reed!percival!bucket!kjvw!kevin From: kevin@kjvw.UUCP (Kevin VandeWettering) Newsgroups: comp.sys.atari.st,sci.electronics Subject: RGB to composite video Keywords: RGB composite video atari st Message-ID: <238@kjvw.UUCP> Date: 15 May 88 03:26:21 GMT Lines: 13