🚀 go-pugleaf

In article <453@dms.UUCP> morris@dms.UUCP (Jim Morris) writes:
>
>I need recommendations for a fast vt100 emulator on the st.
>It has to be able to keep up with data coming in at 9600 baud.
>I have tried AnsiTerm, and Flash so far, and they seem to be
>around 2400 Baud.
>I believe the problem is the screen update rate. These programs will
>allow you to talk to the port at 9600 (Even 19200), but the time they
>take to write to the screen slows them down to about 2400.

Most likely the screen speed isn't the problem.  If you have XON/XOFF
turned on, your speed problems are due to the small RS232 input buffer
in the ST.  If you don't have XON/XOFF turned on, Flash will drop
characters at 9600, and probably at 4800 if your computer can really
send 4800 baud.

The solution is to stick a program in the auto folder that replaces the
I/O buffers with larger buffers.  I wrote a quick little vt52 emulator
(the arrow keys work, and keypad mode almost works), and set the buffers
at 8K each.  The program runs just fine at 19200 - screen I/O is not a
problem.  If you want such an auto-folder program, let me know.  I can
send you source (in MWC), or an executable.

Still, the best solution to your problem I can think of is to get
UniTerm.  This is the program I use now, and it is really good.  You can
get it from the server at Lakesys, I think.
-- 
                     {hpda, uwmcsd1}!sp7040!obie!wes
           "Happiness lies in being priviledged to work hard for
           long hours in doing whatever you think is worth doing."
                         -- Robert A. Heinlein --