Power Supply for Harddrive

Article View: comp.sys.atari.st

Article #33466

#33466

From: Gregory S. Gibson
Date: Wed, 03 Aug 1988 17:24

16 lines
991 bytes

I am in the process of replacing the power supply on my Atari Harddrive 
Sh 204.  The old power supply has two sources for +5VDC and two sources
for +12VDC.  Each +5VDC and +12VDC line is separately connected to the 
disk drive.  One +5VDC line and one +12VDC line is connected to the logic
boards.  One +5VDC line and one +12VDC line is connected to the drive
mechanism.  The new power supply has higher amp rating. Is it necessary
to separate these connections?
Thank you for help


Gregory Gibson
gibson@trwrb.UUCP
-- 
Gregory Gibson
{...ihnp4,ucbvax}!trwrb!gibson

Technical Details

Message-ID: <7488@trwrb.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!attcan!uunet!husc6!bloom-beacon!gatech!ncar!ames!elroy!mahendo!wlbr!scgvaxd!trwrb!gibson

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!attcan!uunet!husc6!bloom-beacon!gatech!ncar!ames!elroy!mahendo!wlbr!scgvaxd!trwrb!gibson
From: gibson@trwrb.UUCP (Gregory S. Gibson)
Newsgroups: comp.sys.atari.st
Subject: Power Supply for Harddrive
Message-ID: <7488@trwrb.UUCP>
Date: 3 Aug 88 17:24:57 GMT
Reply-To: gibson@trwrb.UUCP (Gregory S. Gibson)
Organization: TRW Space and Defense Sector, Redondo Beach, CA
Lines: 16