Article View: comp.sys.atari.st
Article #33803Re: Questions about ST Video Ram
From: Michael B. Vederman
Date: Sun, 28 Aug 1988 00:50
Date: Sun, 28 Aug 1988 00:50
51 lines
2584 bytes
2584 bytes
In article <12@usl-pc.usl.edu> jpdres13@usl-pc.UUCP (John Joubert) writes:
>In article <535@skywest.UUCP> brenes@skywest.UUCP (Erasmo Brenes) writes:
>>... If the Shifter expects the video ram to start at 32K boundaries,
>>then how do I get MWC, or any C program to allocate a 32Kb buffer starting in
>>a 32Kb boundary in an efficient manner? An initial thought was to use Malloc()
>>to allocate 64Kb and then only use the 32Kb which start in a 32Kb boundary,
>>but this method is too wasteful. There's got to be a better way, isn't there?
>
>--------------------------
[deleted
lines of
text]
>
>Here is how I find a 256 byte boundary to put in a screen.
>
[ deleted
lines of
'C' code ]
> /* On a 256 byte boundary. */
> work_scr=(char *)( (long)(blk=malloc(32768L)) & 0xffffff00 )+0x0100;
>
[ More deleted stuff ]
>Hope this helps,
>----------------------------------------------------------------------------
>John Joubert | /\ | /\ | _
>jpdres13@usl-pc.USL or ... | \|<>|>|> \|<>|>|><`|`|
>ut-sally!usl!usl-pc!jpdres13 |-----/|-------/|----------------------
>GEnie: J.JOUBERT | \/ \/
>-----------------------------------------------------------------------------
Dear John,
There is really one little problem with the code you have written, that being if
the block you Malloc is just one byte past a 256 byte boundary, then you will
be wasting 255 bytes, therefore you will need to Malloc at least (32K+255) to
insure that you have at least enough memory to draw a full screen in. Other-
wise you will be overwriting memory which is not yours (a discussion of which
there has been an abundance of these days :-).
- Mike
--
for (;;) : Use ATARINET, send an interactive
do_it(c_programmers); : message such as:
: Tell UH-INFO at UHUPVM1 ATARINET HELP
University Atari Computer Enthusiasts : University of Houston UACE
Technical Details
Message-ID:
<657@uhnix2.uh.edu>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!water!watmath!clyde!att!osu-cis!tut.cis.ohio-state.edu!rutgers!bellcore!tness7!tness1!uhnix1!uhnix2!uace0References:
<535@skywest.UUCP> <2884@bath63.ux63.bath.ac.uk> <12@usl-pc.usl.edu>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!water!watmath!clyde!att!osu-cis!tut.cis.ohio-state.edu!rutgers!bellcore!tness7!tness1!uhnix1!uhnix2!uace0 From: uace0@uhnix2.uh.edu (Michael B. Vederman) Newsgroups: comp.sys.atari.st Subject: Re: Questions about ST Video Ram Message-ID: <657@uhnix2.uh.edu> Date: 28 Aug 88 00:50:58 GMT References: <535@skywest.UUCP> <2884@bath63.ux63.bath.ac.uk> <12@usl-pc.usl.edu> Reply-To: uace0@uhnix2.UUCP Organization: University of Houston Lines: 51