🚀 go-pugleaf

In article <8811211837.AA23186@explorer.dgp.toronto.edu> juancho@dgp.toronto.edu (John Buchanan) writes:
>I am trying to develop a lowrez program, the problem is that i hate 40
>column screens.  What I tried to do this morning was to write two quick
>hacks.  The first low.c was to switch me into low resolution and the other
>medium was to switch me into medium resolution.  Needless to say( otherwise
>I would not be posting this)  I did not achieve my goals.  
>
>
>John W. Buchanan                  Dynamic Graphics Project
>               			  Computer Systems Research Institute

John,
If you're trying to change resolutions and use GEM with the 'new' res,
it can't be done without a reboot (well, desktop isn't happy, but some
things do work). If all you want to do is write your program in 80 columns,
then have the program switch you into low res to run, and then switch back
out when you're finished -- and as long as you don't mind dealing with a
slightly confused GEM, all you've gotta do is use Setscreen(-1l, -1l, 0);
to get into low res, and then Setscreen(-1l, -1l, 1); to get back!

--Kenneth Soohoo	(soohoo@cory.Berkeley.Edu)
  Atari 400/800/600xl/800xl/1200/130xe/65xe, 1040ST hacker
  Sometime Berkeley Student, othertimes...
  My opinions are my OWN, not necessarily Atari's