Article View: comp.sys.atari.st
Article #35662Step Rate
From: Allen King
Date: Tue, 27 Dec 1988 16:56
Date: Tue, 27 Dec 1988 16:56
10 lines
779 bytes
779 bytes
Speaking of "legal official atari sanctioned" ways, how do you set the step rate of one floppy (e.g. drive B) to 6ms. I know how to do it by modifying an unpublished address, and there is a call to set the default step rate. But the latter call must be done before some initialization, which I believe (from reading the ROM code) to be boot time and affecting both drives. Can it be done? (hopefully) flameless EDITORIAL: <deleted due to lack of interest>
Technical Details
Message-ID:
<8812271702.AA11024@ucbvax.Berkeley.EDU>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!watmath!clyde!att!ucbvax!BBN.COM!akingShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!watmath!clyde!att!ucbvax!BBN.COM!aking From: aking@BBN.COM (Allen King) Newsgroups: comp.sys.atari.st Subject: Step Rate Message-ID: <8812271702.AA11024@ucbvax.Berkeley.EDU> Date: 27 Dec 88 16:56:34 GMT Sender: daemon@ucbvax.BERKELEY.EDU Organization: The Internet Lines: 10