Re: Drive B Step Rate

Article View: comp.sys.atari.st

Article #35781

#35781

From: James R. Ballard
Date: Fri, 06 Jan 1989 06:59

18 lines
1262 bytes

Sorry about the header, I'm new to the net and couldn't figure 
out how to enter a new subject...Ok here goes..

  I'm currently working on a interface to go between the comp and
the monitor cable with speaker jacks and a RCA/video output just to
play around and someone suggested adding in a RF modulator for the
1040 users....Does anyone know how the RF module interfaces with
the monitor cable/traces from the motherboard? I would be
appreciative for help on this one...And if it works out who knows,
I might send you a box...Oh yeah, anyone know a relatively cheap
place to buy 13 pin DIN connectors? Thanks you

-- 
#############################################################
#         PRIVATE             #  SAC-UNIX, Sacramento, Ca.  #  
#         PARKING             #  UUCP=...pacbell!sactoh0    #
#############################################################

Technical Details

Message-ID: <608@sactoh0.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!attcan!uunet!husc6!rutgers!mailrus!ames!pacbell!sactoh0!jrballar

References: <809@yugas.UUCP>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!attcan!uunet!husc6!rutgers!mailrus!ames!pacbell!sactoh0!jrballar
From: jrballar@sactoh0.UUCP (James R. Ballard)
Newsgroups: comp.sys.atari.st
Subject: Re: Drive B Step Rate
Summary: Hardware Help
Message-ID: <608@sactoh0.UUCP>
Date: 6 Jan 89 06:59:03 GMT
References: <809@yugas.UUCP>
Organization: Sacramento Public Access, Ca. USA
Lines: 18

Reply to Parent Message