🚀 go-pugleaf

I just sent my GFA Basic (2.0) implementation of uucp/uucico to the
comp.sources.atari.st moderator.  This is a human readable listing
of a uucp compatible file transfer program (the thing that dialup
sites use for Usenet mail and news transfer, like what you are reading
now.)  I also included a write-mail and a read-mail program, along with
some setup information and a discussion of the protocol, for those who
seek to improve upon it.  Collectively they are released into the
public domain and are known as MailTruk V1.0.

I have been using them for the last week (not a lot of debug time) after
writing them for a month or two.  I increased my "effort" after my
Telebit TrailBlazer Plus arrived in mid december.  Now my TB+ can run
at nearly theoretical full speed.  I did a 100,000 byte transfer at an
average rate of 1400 cps!  (This is in compiled mode, in interpreter mode
the rate was about 1200 cps.)  (Those stupid one-packet-window uucp hacks
make 2400 baud run at an effective 1200 baud rate, or ten times slower
that the TB+ with 3-packet-windows!!!)

For those of you who like to experiment, you can change the packet/window
size to any of the allowed values, w=1-7 and p=32-4096.

I wrote it just for me, but I hope someone else can find a use for it too.

-- 
- John M. Logajan @ Network Systems; 7600 Boone Ave; Brooklyn Park, MN 55428  -
- ...rutgers!umn-cs!ns!logajan / logajan@ns.network.com / john@logajan.mn.org -