Article View: comp.sys.atari.st
Article #36435Re: Hooking an ST to an amp
From: C.L. Freemesser
Date: Wed, 08 Feb 1989 00:33
Date: Wed, 08 Feb 1989 00:33
19 lines
1213 bytes
1213 bytes
The easiest way to hook up an ST to an amp is to add an RCA jack to the computer itself. Messing with the monitor worries me ALOT, and I love to hack my hardware. Just get a female RCA port from Radio Shack. Clip a wire to the audio pin on the monitor port (inside the computer, the rear of the pins stick out of the monitor port.....clip to here). Solder the other end of this wire to the INSIDE of the RCA port. Take a second wire. Hook one end to the computer's shielding, the other to the OUTSIDE of the RCA port. That's all there is to it! However, on the 520st (or at least mine), doing this cuts out the monitor's speaker. It does not seem to do this on the 1040. =cf= Chris Freemesser BITNET: %clf3678@RITVAXB
Technical Details
Message-ID:
<331@ultb.UUCP>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!rochester!rit!ultb!clf3678References:
<106@jarthur.Claremont.EDU> <46300014@uxf.cso.uiuc.edu>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!rochester!rit!ultb!clf3678 From: clf3678@ultb.UUCP (C.L. Freemesser) Newsgroups: comp.sys.atari.st Subject: Re: Hooking an ST to an amp Message-ID: <331@ultb.UUCP> Date: 8 Feb 89 00:33:15 GMT References: <106@jarthur.Claremont.EDU> <46300014@uxf.cso.uiuc.edu> Reply-To: clf3678@ultb.UUCP (C.L. Freemesser (709ITP)) Organization: Rochester Institute of Technology, Information Systems Lines: 19