Re: Broken ST

Article View: comp.sys.atari.st

Article #36661

#36661

From: hedger
Date: Fri, 17 Feb 1989 13:16

11 lines
959 bytes

I'd check for a weak solder joint or bad connection especially around
the upgrade. If it's the plug in type, I'd open up the ST and give the
plug in chips a good push to make sure they are tight. 


=====================================================================
|                                                                   |
| Keith Hedger :  {...!}uunet!inmet!hedger   hedger@inmet.inmet.com |
|                                                                   |
=====================================================================

Technical Details

Message-ID: <148900016@inmet>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!watmath!clyde!att!osu-cis!tut.cis.ohio-state.edu!rutgers!mit-eddie!bbn!inmet!ishmael!inmet!hedger

References: <836@wpi.wpi.edu>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!watmath!clyde!att!osu-cis!tut.cis.ohio-state.edu!rutgers!mit-eddie!bbn!inmet!ishmael!inmet!hedger
From: hedger@inmet
Newsgroups: comp.sys.atari.st
Subject: Re: Broken ST
Message-ID: <148900016@inmet>
Date: 17 Feb 89 13:16:00 GMT
References: <836@wpi.wpi.edu>
Lines: 11
Nf-ID: #R:wpi.wpi.edu:-83600:inmet:148900016:000:549
Nf-From: inmet!hedger    Feb 17 08:16:00 1989

Reply to Parent Message