Article View: comp.sys.atari.st
Article #36763BMS100 /w SCSI drive
From: Wolf-Dieter Batz
Date: Mon, 27 Feb 1989 12:45
Date: Mon, 27 Feb 1989 12:45
14 lines
980 bytes
980 bytes
Hi ppl, here's some problem report from a pretty european layman: After weeks of decision processes I purchased the well-known atari ST host adaptor from Berkeley Microsystems, "BS100". This is told to interface the ST-DMA port to a SCSI bus, /w reduced CCS, though. Tryin' it with a ST277N drive the installation routine does not recognize it as regular DMA device (all numbers grey!!!). Furthermore the BMSINIT.PRG does not seem to support a drive with 64 MB. So: What can I do? Hints greatfulliest appreciated - thanxalott! Virtually *** WDB
Technical Details
Message-ID:
<8902271245.AA27866@ucbvax.Berkeley.EDU>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!DHDURZ1.BITNET!L12Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!DHDURZ1.BITNET!L12 From: L12@DHDURZ1.BITNET (Wolf-Dieter Batz) Newsgroups: comp.sys.atari.st Subject: BMS100 /w SCSI drive Message-ID: <8902271245.AA27866@ucbvax.Berkeley.EDU> Date: 27 Feb 89 12:45:36 GMT Sender: daemon@ucbvax.BERKELEY.EDU Organization: The Internet Lines: 14 X-Unparsable-Date: Mon, 27 Feb 89 13:30:03 CET