Article View: comp.sys.atari.st
Article #36969Re: Adaptec controller boards
From: Rob Thurlow
Date: Wed, 08 Mar 1989 06:31
Date: Wed, 08 Mar 1989 06:31
14 lines
1195 bytes
1195 bytes
In article <36500062@iuvax> jwd@iuvax.cs.indiana.edu writes:
>Could someone tell me what the difference is between the Adaptec
>4000 and 4000A hard disk controller cards? And will either one
>work in combination with an ICD host adaptor and MFM drive?
NO! The Adaptec 4000A is a combination of the Adaptec 4000 and 4010
interface cards, according to the Adaptec 40xx series manual. You don't
want an Adaptec 4000 at all - either the 4000A or the 4070 will work fine.
--
"There was something fishy about the butler. I think he was a
Pisces, probably working for scale." - Nick Danger
Robert Thurlow {uunet,ubc-cs}!van-bc!rthurlow
Vancouver, BC, Canada or rthurlow@van-bc.UUCP
In the heart of Kitsilano or rthurlow@wimsey.bc.ca
Technical Details
Message-ID:
<2277@van-bc.UUCP>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!csd4.milw.wisc.edu!leah!itsgw!steinmetz!uunet!van-bc!rthurlowReferences:
<36500062@iuvax>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!csd4.milw.wisc.edu!leah!itsgw!steinmetz!uunet!van-bc!rthurlow From: rthurlow@van-bc.UUCP (Rob Thurlow) Newsgroups: comp.sys.atari.st Subject: Re: Adaptec controller boards Message-ID: <2277@van-bc.UUCP> Date: 8 Mar 89 06:31:52 GMT References: <36500062@iuvax> Reply-To: rthurlow@van-bc.UUCP (Rob Thurlow) Organization: Wimsey Associates, Vancouver, BC. Lines: 14