🚀 go-pugleaf

In article <19890@uflorida.cis.ufl.EDU> drc@beach.cis.ufl.edu writes:
>leftmost column on the screen are strangely compressed.  Their height
>is normal but they are noticeably less wide than normal.   After a few
>minutes the effect goes away, and all characters look normal.   Can
>anyone tell me what causes this and/or how to avoid it?   Thanks in
>advance.

I noticed the same effect when my 520ST+ at work got a SH205
harddisk. Whenever I switch on the SH205 before the ST the
effect appears. However, when I switch on the ST before the
harddisk everything looks as it should. So this is what I
am doing:

1. Switch on the ST
2. Wait until the desktop appears
3. Switch on harddisk and floppy
4. Press reset to boot from harddisk

On a ST with built-in floppy this procedure would require a
boot from floppy as you cannot switch it off separatly. Ok, the
whole thing takes a bit longer than a direct harddisk startup
but I couldn't stand that nasty monitor look for hours.

  Rainer Klute                  ----   klute@irb.informatik.uni-dortmund.de
  Universitaet Dortmund, IRB    |)|/   klute@unido.uucp, klute@unido.bitnet
  Postfach 500500               |\|\   ...uunet!mcvax!unido!klute
D-4600 Dortmund 50              ----   Tel.: +49 231 7554663